CA/Line
In line circular duct fan.
Available in Diam. 100 to 315mm
Featuring:
- Sheet steel casing
- External terminal box
- Easy, rapid installation
- Support foot included
- 3-speed motors with long-life ball bearings and IP44 protection
- Single-phase 220-240 V 50/60 Hz
- Operating temperature -25 °C +60 °C
NEOLINEO/EW
In line circular duct fan.
Available in Diam. 100 to 315mm
Featuring:
- Casing made of self-extinguishing V0 plastic material
- External terminal box with variable position
- Easy, rapid installation
- E.C. Technology motors fitted with long-life ball bearings
- IP44 protection
- Two-speed selector switch.
- Each speed can be adjusted by a power meter in the terminal box. Model 315 adjustable using 0-10V external signal.
- Single-phase 220/-240 V‐50 Hz
- Operating temperature: -10 °C +50 °C
Get in touch with our sales team.
SVE/PLUS/EW
In line circular duct fan.
Available in Diam. 100 to 400mm
Featuring:
- Manufactured from galvanised sheet steel
- Acoustic casing coated with phonoabsorbent material
- All models fitted with a reaction impeller
- Standardised inlet and impulsion flanges allowing for easy installation in ducts
- Fitted with a folding inspection cover
- Support feet built into the box, for easy installation
- Linear airflow direction
- Speed controlled by a built-in 10 kΩ MTP010 power meter or an external 0‐10 V signal
- Single-phase 200‐240 V 50/60 Hz, IP54 protection. Except model SVE/PLUS/EW‐400/H, 200‐277 V 50/60 Hz, IP55 protection
- Maximum temperature of air to be carried: ‐25 °C +60 °C. Except model SVE/PLUS/EW‐200/H, ‐25 °C +45 °C
- External E.C. Technology rotor motors with high efficiency and built-in variable speed drive controlled by 0‐10 V signal
SVE/PLUS/EW-/CPC
In line circular duct fan.
Available in Diam. 100 to 400mm
Featuring:
- Manufactured from galvanised sheet steel
- Acoustic casing coated with phonoabsorbent material
- All models fitted with a reaction impeller
- Standardised inlet and impulsion flanges allowing for easy installation in ducts
- Fitted with a folding inspection cover
- Support feet built into the box, for easy installation
- Linear airflow direction
- Single-phase 200-240 V 50/60 Hz, IP54 protection. Except model SVE/PLUS/EW-400/H, 200-277 V 50/60 Hz, IP55 protection
- Maximum temperature of air to be carried: ‐25 °C +60 °C. Except model SVE/PLUS/EW-200/H, ‐25 °C +45 °C
- External E.C. Technology rotor motors with high efficiency
- CPC control:
- Equipment preconfigured in constant pressure mode with 100 Pa set-point
- Possibility of adjustment to other pressures
- Possibility of working with a constant flow rate
- Plug&Play system for easy installation
- Programming range from 0 to 2500 Pa
- On-off switch with built-in safety locking system
- 230 V AC single-phase and 380 V AC three-phase power versions
- IP55 protection.
Rectangular Duct Fans
CL
In-line, low profile, rectangular duct fans with inspection hatch to facilitate cleaning
Available in 8 sizes from 400×200 to 1000×500
Featuring:
- Manufactured from galvanised sheet steel casing
- Forward-curved impeller made of galvanised sheet steel
- Class F external rotor motors with ball bearings. IP55 protection in junction box
- Single-phase 230 V 50 Hz and three-phase 230/400 V 50 Hz
- Operating temperature: -20 °C +40 °C
- Built-in thermal contact protection.
CL/PLUS
In-line rectangular duct extractor fans with 50 mm insulation
Available in 8 sizes from 400×200 to 1000×500
Featuring:
- Manufactured from galvanised sheet steel
- Forward-curved impeller made of galvanised sheet steel
- External junction box made of V0 fireproof material and with IP55 protection
- CL/PLUS: Class F external rotor motors with ball bearings and IP54 protection.
- Single-phase 230 V 50 Hz and three-phase 230/400 V 50 Hz.
- Operating temperature: -20 °C +50 °C
FAR EC
Ventilation Box Fan unit equipped with backward blade radial electronic ventilators (ErP-2015) that ensure the high pressure values available for channeling and a simple adjustment of the rotation speed of the ventilator (signal 0-10V).
- FAR-EC is available in 10 sizes from 400 to 16.000 m3/h.
- Use of EC ventilators enables management of FAR-EC in various ways:
- Connection of the electrical power supply only ensures FAR-EC works at the maximum available flow rate;
- Use of a 0-10V signal coming from an external system or a simple potentiometer regular (the CVR accessory for example) allows rotation adjustment of the ventilator and therefore air flow rate;
- The use of the COP KIT or CAV KIT enables management of FAR-EC respectively in constant pressure or constant flow rate mode.
- The use of advanced control allows more adjustments
The range of accessories available comes complete with: a feet kit for installation on the floor, a protective roof and hood with bird-proof mesh for outdoor installation, a vibration-proof joint for a channelled, square section joint and a panel with a sleeve for connection to circular section channelling systems
STRUCTURE
FAR-EC is manufactured using a profiled extruded aluminium frame and 25 mm thick sandwich panels, insulated in polyurethane foam. The panels are manufactured in Aluzinc , material that ensures high strength against corrosion and oxidation. The ventilator is connected on the suction side of the air to a specific nozzle to optimise ventilator performance. The position on the supply side of the air is easily configurable: simply remove it and subsequently re-position a panel fixed to the frame with screws.
Note: The unit is supplied as standard with 5 of the 6 panels; For the 6° panel you can choose between the standard panel (to be drilled for your care in the section and size required), the panel with sleeve for circular duct or the anti-vibration joint