Highlights
GreenMaster HP compact recovery units are built in two sections. The upper compartment is dedicated to the ventilation air extract system from the building. Composing of an EC Plug-fan, recovery water battery designed for various designed air flows, ePM1 65% bag filters and a motorized shutoff damper with spring return action.
The lower section of the air handling unit contains the high efficient ultra quiet compact heat-pump which includes 2 heat exchangers and 2 circulations pumps for the brine water circuit and the heating circuit to the buffer tank.
The unit casing is Eurovent tested and certified T2/TB2/L2/D1F9/C4 with 45mm insulated panels with adjustable legs. doors for access to the unit have lockable doors with hinges and handles for extra safety.
All units are tested and pre-programs with easy-to-use plug & Play controller.
Controllers can be supervised remotely via cloud on myUpway cloud link via intranet cable connected directly to the unit. A Modbus RS485 module can be added for added communication.
Unit casing is designed for indoor or complete with a protection roof for an outdoor installation.
Great energy savings
By designing the unit with A21/W35, A21/W45 or A21/W55, the exhausted air temp can be reduced up to 3°C to achieve high heating capacity, or as high as 8-10°C exhaust air temp for SCOP values above 3.8 for cold climate.
Through collaboration with NIBE, Air-Site has developed a fantastic energy saving solution, with focus on reliability and low noise. With cooling modules from renowned NIBE, encapsulated with maximum sound proofing and vibration dampening isolation, and with high quality ventilation units from Air-Site, GreenMaster is the ultimate solution for reliable and quiet energy saving.
GM-HP compact units are available in 4 sizes with single or double Heat-pumps covering 1000 to 7000 m3/h with operating pressure of 300Pa. other working points available on demand.
GM-C-F extract air units combined with F1155 or S1155 heat-pumps units are available in many sizes and capacities with single or double Heat-pumps covering 1000 to 30’000 m3/h with operating pressure of 300Pa. other working points available on demand.
Get in touch with our sales team.
GreenMaster HP Compact
GreenMaster C-F with separate heat pump
GreenMaster HP Compact
- High temperature range:
- Supply water temperature 55°C.
- Return water temperature 45°C.
- Air flow 1000–7000 m3/h in 4 compact size solution
- Easy to remove the cooling module.
- Fire damper prevents flue gases entering the entire unit.
GreenMaster HP Compact
A compact solution where the exhaust air ventilation section and the heat pump section are combined in a factory-assembled unit and the brine pipes are pre-connected inside the unit. GreenMaster HP Compact is ideal where there is sufficient height and enough space to install everything together.
Indoor Installation
Outdoor Installation
GreenMaster C-F
- High temperature range:
- Supply water temperature 55°C.
- Return water temperature 45°C.
- Air flow 1500-35’000 m3/h in 12 Decentralize-Extract Heat-Pump solution
- Easy to remove the cooling module.
- Fire damper prevents flue gases entering the entire unit.
GreenMaster C-F Separate heat-pump
Ideal in attics with low ceiling and an exhaust air ventilation system. The heat-pump is installed in the mechanical room, which means fewer units in the attic for technicians to inspect and service.
Indoor Installation
Outdoor Installation
